Beretta Elite II - CO2 airgun pistol CO2 air gun pistol using compressed carbon dioxide gas to drive the ball out of air gun pistol barrel at high speed. Use of compressed air similar to paintball, compressed carbon dioxide is contained in a tank connected to the air gun pistol through a valve. The valve is in turn connected to the trigger, pull the trigger a short burst of speed when flying into the CO2 pistol, and then out of it through the most difficult road - Open barrel. This propulsion is used to fire the gun particles in a reliable, fast.
CO2 airgun pistol is fundamentally different from the spring air gun pistol, because they use a completely different form of mechanical force precipitate a pop gun barrel. A spring can be reliably fire balls, but the springs wear over time - every time a gun is used to trigger the spring it is a slight deformation of the projectile, and force over time and accuracy decreased.
AVI12 grams of carbon dioxide cartridge - 10 PackThe mainly use CO2 air gun pistol shooting mode in the spring, and the main reason for any serious Airsoft players should look to buy a model, is the gas tank itself is not part of the air gun shots. They can easily be removed and replaced, and when the gas is low, they can re-filling and re-use. Most tanks have an indicator to show when the gas pressure has been depleted, so when the cartridge is necessary. They will not be unpredictable, but decreasing performance over time.
Another advantage: the spring break. Valve can break, but less involved because of mechanical motion to open and close the valve is not common. If the air gun pistol spring break can take a lot of time to replace it. Not so aerodynamic pistol.
Tidak ada komentar:
Posting Komentar